Dallas Bath Remodeling

Posts Tagged ‘Installing Tile’

There is a wide selection of projects you can do when remodeling your lavatory. You need to think about your budget, how much time you are able to afford the bathroom to be out of use, and who will be using the rest room before making a call about the extent of your rest room rework. There are lots of small things you can do if your position has limits.

There are some remodeling projects that can be completed in a day while others could take a week or more. If the lavatory you are considering remodeling is for your children to use, then you might want to hold back on installing dear cabinetry and marble counter tops. Children can be hard on furniture and it may be better to transform the bathroom again after they leave the house.

Small changes can make a large difference in a lavatory as the room isn’t large and there are a controlled number of things to draw the eye. Sometimes, just a good cleaning and changing the accessories like the rugs, shower curtain, soap dish, etc . Can make a bathroom look as new again. Other times, you need to do a little more to give your bathroom a new lease on life. Replacing a sink and vanity cabinet is an easy do it yourself project that you can complete in a day and inexpensively. If you research you will find bathroom self-importance cabinets that are cheap. So long as you keep the style and shape of the sink and its hardware the same, you will not need the help of a plumber and this is a simple project.

if you need to do a little more, you might consider changing the floor. You can buy tile at any home improvement or bathroom supply store and installing tile is reasonably simple too. Tearing up the old floor can be difficult dependent on how the bathtub or toilet were installed, but you should not run into too many issues. You could have to hire a special saw to cut pieces of the tile, but most of the tile installation can be done with basic tools. You will have to give the grout and mortar at least a day to toughen and then another day to let the sealer dry. So if you replace the tile floor, you will not be able to use the lavatory for at least 2 to 3 days.

If you want to knock down walls and enlarge your loo space or do a major transform where you move round the toilet fixtures and need the help of a contractor, plumber, or electrician, then the project will obviously be more expensive and take more time. Major transforming projects like this may be planned meticulously so you do not have to backtrack and pay for extra time with the pros. You might want to try using bathroom remodeling software that can help you plan. Programs will tell you precisely how much material you will need and can give your hired professionals a clear idea of what you want as you can print out photos and plans. Occasionally your wishes can be lost in translation if you simply try and describe what you need.

Installing Bathroom Wall Tile – Preparation
Measure the wall area that’s to be covered with tiles. Check for any holes in the wall and patch them up. It is suggested that you use a cement backer board. They’re half inch thick and come in sizes of 5X8 feet length and width. Choose the suitable backer board and install them using drilling machine and screws.

Installing Bathroom Wall Tile – Working on the Layout
Find out the middle of the wall with the help of the measurements taken before. Installation should always begin at the middle of the wall and end at the edges because bathroom walls are never completely square. Beginning from the midpoint of the wall, chalk the outlines of the tiles to form a layout of all the tiles to be installed. Ensure symmetry, leveling and correct right angled squares while drawing the layout on the backer board. Mark the areas for any plumbing fixtures and change the layout accordingly .

Installing Bathroom Wall Tile – Installation of Tiles
Start from the center line and apply coat of adhesive with the help of the smooth side of a notched spade. Use the nicked side of the spade to spread the adhesive. Work in sections while trying the adhesive to the backer board. Fix the first tile at the middle of the layout in a twisted motion to ensure that it has adhered correctly. Similarly place remaining tiles on the backer board. Place the tile spacers after installing each tile so that the width of the grout line between the tiles will be consistent. At the ends of the walls, you could have to chop the tiles in order that they fit into the layout. Employ a tile cutter for the same and use a higher grit sandpaper to smoothen the edges. Leave the adhesive for an overnight to dry.

Installing Bathroom Wall Tile – Grouting
Once you are done with installation of rest room tiles, start with the grouting. Select a grout that’s suitable for the grout width of the tiles. For grout width more than one / eight inches sanded grout is utilized, else unsanded grout is utilized. Prepare the grout according to the manufacturer’s direction and take out all the tile spacers. Ensure that the grout you are using is waterproof. With the assistance of a rubber float, apply the grout between the tiles using a diagonal motion to the grout lines. See that you apply grout completely and the grout has reached the base of the spaces. Rub out the extra grout with help from a wet sponge. Leave the grout to dry and clean the surface with a wet fabric gently, to remove any grout remains on the tile. The grout should get left for another day and check out for any grout marks.

You may apply a grout sealer if you want to, after a week of installation. Now that you know how to tile toilet wall, you can re-tile your toilet and enhance your toilet decor. Accuracy and correct layout are the two basic wishes when installing loo wall tiles correctly.